電鍍設備的任何機械設備都需要正確的日常維護。只要正確的維護可以確保設備的正常運行，在這里我們將為您介紹電鍍設備的日常維護。希望這種分析可以幫助您充分利用電鍍設備。
Any mechanical equipment of electroplating equipment needs proper routine maintenance. As long as the correct maintenance can ensure the normal operation of the equipment, here we will introduce the daily maintenance of electroplating equipment for you. It is hoped that this analysis can help you to make full use of electroplating equipment.
電鍍設備的作用是防止毒物從皮膚侵入人體，避免強酸，強堿和其他毒物對皮膚的損害，并避免汞和其他強力吸附在頭發和衣服上的毒物的吸附。車間有多種類型的人身保護，應根據所食用有毒物質的類型，性質和工作條件而定。
The function of electroplating equipment is to prevent poison from invading the human body from the skin, to avoid the damage of strong acid, alkali and other poisons to the skin, and to avoid the adsorption of mercury and other toxic substances strongly adsorbed on the hair and clothes. There are many types of personal protection in the workshop, which should be determined according to the type, nature and working conditions of toxic substances consumed.
選擇合適的品種和型號。如果電鍍設備工作場所的空氣中的毒物為易燃易爆氣體，則應選擇防靜電保護設備，以免人體靜電引起的爆炸事故。 設備的電鍍毒物可從皮膚侵入人體。
Choose the right variety and model. If the poisons in the air of electroplating equipment workplace are flammable and explosive gases, anti-static protection equipment should be selected to avoid explosion accidents caused by human body static electricity. The electroplating poison of the equipment can invade the human body from the skin.
除引起人類疾病外，它還可以作用于皮膚，形成職業性皮膚病。為防止有毒物質從皮膚侵入人體，除了個人防護設備外，還應在裸露的皮膚上使用皮膚保護劑。常用的保護劑是軟膏，糊劑，成膜劑和乳劑。
In addition to causing human diseases, it can also act on the skin to form occupational skin diseases. In order to prevent toxic substances from entering the human body from the skin, in addition to personal protective equipment, skin protectants should also be used on the exposed skin. Common protectants are ointment, paste, film-forming agent and emulsion.
在電鍍設備運行期間，各種規格的桶式電鍍機應始終保持警惕，尤其是在異常情況下。 一旦發現設備異常運行，應立即切斷設備電源，并由專業人員進行維修。當連續電鍍設備工作時，無法進行調整。自動滾鍍生產線是指設備的工作周期。在此期間，請勿進行任何調整或維護工作，否則將無法連續工作，導致工作結果出現一定偏差，不利于標準化生產。
During the operation of electroplating equipment, all kinds of barrel electroplating machines should always be vigilant, especially in abnormal conditions. Once the abnormal operation of the equipment is found, the power supply of the equipment shall be cut off immediately and repaired by professional personnel. When the continuous plating equipment is working, it can not be adjusted. Automatic barrel plating production line refers to the working cycle of the equipment. During this period, do not carry out any adjustment or maintenance work, otherwise it will not be able to work continuously, resulting in a certain deviation in the work results, which is not conducive to standardized production.
關于電鍍生產線更好的為企業服務就要找到良好的電鍍設備廠家.
About electroplating production line, better service for enterprises is to find a good electroplating equipment manufacturers